[cisco-voip] MOH input CCME

[Bill Riley III]

I have a customer that is using Call manager express. They have recently
purchased a live MOH system to play a Musak stream. The device is made
by premier technologies. The only output is an RCA connection currently
but they have a RCA to RJ-11 adaptor. I am trying to find out exactly
what I need to connect the RJ-11 port from this MOH system into on my
CCME system. I asked the vendor if it was an analog connection and if my
device needed to provide dial tone. Their response was that it was a
5-ohm output with an amplifier and I needed to plug it into my phone
systems MOH input. So rather than going back and fourth with them I
decided to see if anyone has any experience with these type of devices
and what you would suggest. Thanks for your help. 

 

 

NOTICE: This electronic mail message and any files transmitted with it are intended exclusively
for the individual or entity to which it is addressed. The message, together with any attachment, may contain confidential and/or privileged
information. Any unauthorized review, use, printing, saving, copying, disclosure 
or distribution is strictly prohibited. If you have received this message in error, please immediately
advise the sender by reply email and delete all copies.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060928/a00eadd6/attachment.html