[cisco-voip] MOH input CCME

[Ryan Ratliff]

This doc is for CME 3.3.

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/ 
products_configuration_guide_chapter09186a00804ad866.html#wp2175068

-Ryan

On Sep 28, 2006, at 9:39 AM, Bill Riley III wrote:





I have a customer that is using Call manager express. They have  
recently purchased a live MOH system to play a Musak stream. The  
device is made by premier technologies. The only output is an RCA  
connection currently but they have a RCA to RJ-11 adaptor. I am  
trying to find out exactly what I need to connect the RJ-11 port from  
this MOH system into on my CCME system. I asked the vendor if it was  
an analog connection and if my device needed to provide dial tone.  
Their response was that it was a 5-ohm output with an amplifier and I  
needed to plug it into my phone systems MOH input. So rather than  
going back and fourth with them I decided to see if anyone has any  
experience with these type of devices and what you would suggest.  
Thanks for your help.





NOTICE: This electronic mail message and any files transmitted with  
it are intended exclusively for the individual or entity to which it  
is addressed. The message, together with any attachment, may contain  
confidential and/or privileged information. Any unauthorized review,  
use, printing, saving, copying, disclosure or distribution is  
strictly prohibited. If you have received this message in error,  
please immediately advise the sender by reply email and delete all  
copies.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip