[cisco-voip] 7961/7914 SRST

[Kent]

Learned just this past weekend that some of the IOS Code for SRST has an 
issue in it causing 7961 and 7941 phones not to register.  My coworker 
dealt with this, so I don't have much info on it yet.


Roush, David wrote:
>
> When our phones go into SRST mode, none of the 7961/7914 will go into 
> SRST mode, they just continually say Registering. Here is a sh 
> call-manager-fallback:
> CONFIG (Version=4.0(0))
> =====================
> Version 4.0(0)
> For on-line documentation please see:
> www.cisco.com/univercd/cc/td/doc/product/access/ip_ph/ip_ks/index.htm 
> <javascript:newWin('http://www.cisco.com/univercd/cc/td/doc/product/access/ip_ph/ip_ks/index.htm')> 
>
>
> ip source-address X.X.X.X port 2000
> max-ephones 30
> max-dn 96 dual-line
> max-conferences 4 gain -6
> dspfarm units 0
> dspfarm transcode sessions 0
> huntstop
> no huntstop channel
> voicemail 918005555555
> cnf-file location: system:
> cnf-file option: PER-PHONE-TYPE
> network-locale[0] US (This is the default network locale for this box)
> network-locale[1] US
> network-locale[2] US
> network-locale[3] US
> network-locale[4] US
> user-locale[0] US (This is the default user locale for this box)
> user-locale[1] US
> user-locale[2] US
> user-locale[3] US
> user-locale[4] US
> srst mode auto-provision is OFF
> srst ephone template is 0
> srst dn template is 0
> srst dn line mode is single
> time-format 12
> date-format mm-dd-yy
> timezone 12 Eastern Standard/Daylight Time
> secondary-dialtone 9
> call-forward busy 918005555555
> call-forward noan 918005555555 timeout 3
> no call-forward pattern is configured.
> no transfer-pattern is configured, transfer is restricted to local 
> SCCP phones only.
> keepalive 30
> timeout interdigit 5
> timeout busy 10
> timeout ringing 180
> caller-id name-only: enable
> Limit number of DNs per phone:
> 7910: 36
> 7935: 36
> 7936: 36
> 7940: 6
> 7960: 20
> 7970: 36
> Log (table parameters):
> max-size: 150
> retain-timer: 15
> transfer-system full-consult
> local directory service: enabled.
>
> Reading through the SRST Manuals for 4.0 it says no additional 
> configuration is necessary for the 7914. Any ideas?
>
> Thanks
>
>  
>
> David
>
> CONFIDENTIALITY NOTICE: 
> This e-mail and any attachments contain information from 
> the law firm of McKenna Long & Aldridge LLP, and are 
> intended solely for the use of the named recipient or 
> recipients. This e-mail may contain privileged 
> attorney/client communications or work product. Any 
> dissemination of this e-mail by anyone other than an 
> intended recipient is strictly prohibited. If you are not a
> named recipient, you are prohibited from any further 
> viewing of the e-mail or any attachments or from making any 
> use of the e-mail or attachments. If you believe you have 
> received this e-mail in error, notify the sender 
> immediately and permanently delete the e-mail, any 
> attachments, and all copies thereof from any drives or 
> storage media and destroy any printouts of the e-mail or 
> attachments.
>
>   
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>