[cisco-voip] 7961/7914 SRST

[Jason Aarons (US)]

I've had no issues with 12.4(4)XC with 7941/7961 with twenty sites and
500 phones running SRST across 2801/2811s. It was the first image with
SRST support for the third-gen phones. Had been using 7.x device load,
upgraded to 8.2(1) for DST2007.

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Kent
Sent: Monday, April 02, 2007 10:13 PM
To: Roush, David
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] 7961/7914 SRST

Learned just this past weekend that some of the IOS Code for SRST has an

issue in it causing 7961 and 7941 phones not to register.  My coworker 
dealt with this, so I don't have much info on it yet.


Roush, David wrote:
>
> When our phones go into SRST mode, none of the 7961/7914 will go into 
> SRST mode, they just continually say Registering. Here is a sh 
> call-manager-fallback:
> CONFIG (Version=4.0(0))
> =====================
> Version 4.0(0)
> For on-line documentation please see:
> www.cisco.com/univercd/cc/td/doc/product/access/ip_ph/ip_ks/index.htm 
>
<javascript:newWin('http://www.cisco.com/univercd/cc/td/doc/product/acce
ss/ip_ph/ip_ks/index.htm')> 
>
>
> ip source-address X.X.X.X port 2000
> max-ephones 30
> max-dn 96 dual-line
> max-conferences 4 gain -6
> dspfarm units 0
> dspfarm transcode sessions 0
> huntstop
> no huntstop channel
> voicemail 918005555555
> cnf-file location: system:
> cnf-file option: PER-PHONE-TYPE
> network-locale[0] US (This is the default network locale for this box)
> network-locale[1] US
> network-locale[2] US
> network-locale[3] US
> network-locale[4] US
> user-locale[0] US (This is the default user locale for this box)
> user-locale[1] US
> user-locale[2] US
> user-locale[3] US
> user-locale[4] US
> srst mode auto-provision is OFF
> srst ephone template is 0
> srst dn template is 0
> srst dn line mode is single
> time-format 12
> date-format mm-dd-yy
> timezone 12 Eastern Standard/Daylight Time
> secondary-dialtone 9
> call-forward busy 918005555555
> call-forward noan 918005555555 timeout 3
> no call-forward pattern is configured.
> no transfer-pattern is configured, transfer is restricted to local 
> SCCP phones only.
> keepalive 30
> timeout interdigit 5
> timeout busy 10
> timeout ringing 180
> caller-id name-only: enable
> Limit number of DNs per phone:
> 7910: 36
> 7935: 36
> 7936: 36
> 7940: 6
> 7960: 20
> 7970: 36
> Log (table parameters):
> max-size: 150
> retain-timer: 15
> transfer-system full-consult
> local directory service: enabled.
>
> Reading through the SRST Manuals for 4.0 it says no additional 
> configuration is necessary for the 7914. Any ideas?
>
> Thanks
>
>  
>
> David
>
> CONFIDENTIALITY NOTICE: 
> This e-mail and any attachments contain information from 
> the law firm of McKenna Long & Aldridge LLP, and are 
> intended solely for the use of the named recipient or 
> recipients. This e-mail may contain privileged 
> attorney/client communications or work product. Any 
> dissemination of this e-mail by anyone other than an 
> intended recipient is strictly prohibited. If you are not a
> named recipient, you are prohibited from any further 
> viewing of the e-mail or any attachments or from making any 
> use of the e-mail or attachments. If you believe you have 
> received this e-mail in error, notify the sender 
> immediately and permanently delete the e-mail, any 
> attachments, and all copies thereof from any drives or 
> storage media and destroy any printouts of the e-mail or 
> attachments.
>
>   
>
------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>   

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.