[cisco-voip] Cisco 3524XL as a Voice access switch

[Jason Aarons (US)]

3500XL-24PS doesn't have the switchport macro auto qos voip cisco-phone;
you would have to add QoS manually. 

You setup switchport mode trunk, switchport trunk encap dot1q, and
switchport voice vlan x. Allowing automatic voice vlan configuration to
be passed via CDP to phone.

The Configuration Guide for the 3500XL is well documented, still a great
switch in my mind.....



-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Adrian Chadd
Sent: Monday, April 02, 2007 9:34 PM
To: Jonathan Charles
Cc: cisco-voip
Subject: Re: [cisco-voip] Cisco 3524XL as a Voice access switch

On Mon, Apr 02, 2007, Jonathan Charles wrote:
> Got a customer, they are not replacingtheir PoE 3524s, I haven't seen
one of
> these in years and I have not configured it for voice, ever.
> 
> So, does it trust DSCP and CoS settings for phones (the Univercd
doesn't
> seem to say so, nor does the QoS SRND)?
> 
> Does it do auto qos?
> 
> Does it do the neat mappings for QoS?
> 
> Does anyone have a configuration example of one of these things with
QoS on
> it for Cisco IP Phones?

There's a perfectly good one floating about on the Cisco website in the
documentation
section for the 3500-XL IOS.

In a nutshell:

* no, I don't think they do Auto-QoS, but
* all the basics are in the documentation, and
* they don't do "voice" vlan negotiation like later switches; its set
statically.

Place to start:

http://www.cisco.com/en/US/products/hw/switches/ps637/products_configura
tion_guide_chapter09186a00800d9d3d.html#xtocid28

If all you're doing is voice then the configuration shouldn't be that
hard.
It might get a bit less fun if you're doing anything terribly
complicated.





Adrian

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.