[cisco-voip] Exchange 2007 UM and CUCM 5.1

[CarlosOrtiz at bayviewfinancial.com]

So when you say "Unity Dies".....you mean that this is a superior 
replacement??





"Loraditch, Matthew*" <mlorad1 at towson.edu> 
Sent by: cisco-voip-bounces at puck.nether.net
04/09/2007 11:05 AM

To
<cisco-voip at puck.nether.net>
cc

Subject
Re: [cisco-voip] Exchange 2007 UM and CUCM 5.1






Here is a good place to start for feature lists and such: 
http://www.microsoft.com/exchange/evaluation/unifiedmessaging/default.mspx
However in answer to your question I believe Exchange UM supports most of 
these features OOB.  From what I understand MWI isn’t a standardized 
feature across platforms and that is why it was left to a 3rd party to 
develop an addon.
 
Matthew Loraditch
 
From: cisco-voip-bounces at puck.nether.net 
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Klaczko, Edwin
Sent: Monday, April 09, 2007 10:49 AM
To: cisco-voip at puck-nether.net
Subject: Re: [cisco-voip] Exchange 2007 UM and CUCM 5.1
 
What about Directory Handlers and Alternate, Closed greetings etc.  Will 
these functions also require 3rd party apps?
 
 
 
Eddie Klaczko
IP Telephony / Network Specialist
CC Schaumburg School District 54

From: cisco-voip-bounces at puck.nether.net 
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jonathan Charles
Sent: Saturday, April 07, 2007 11:36 AM
To: cisco-voip at puck-nether.net
Subject: [cisco-voip] Exchange 2007 UM and CUCM 5.1
 
So, had an Exchange 2007 Unified Messaging test box and a CCM 5.1 box... 

I created a SIP trunk to the Exchange 2007 box (with MTP) pointed a route 
pattern at (call it the vmail pilot, but this is so much more than vmail, 
it is hard to even suggest using that phrase any more)... 

On Exchange created a UM user, added his DN, created a PIN, added a UM IP 
gateway (basically just name it and add the IP of CCM), selected a 
dial-plan (tell it how many digits to expect)...

I dialed the pilot and Exchange answered and read me the name of the user 
from Exchange (it is a CG voice, but it sounds very good) and went right 
into Outlook Voice Access... 

OK, here is where Unity dies.

You do not have access to JUST voice mail, you also have access to your 
Email, Calendar, corporate directory, personal contacts... It initially 
tells you how many emails, voicemails and any upcoming calendar events... 
You can have it read you your email (and it sounds pretty good), you can 
reply (it sends a WMA file back to the person), you can schedule meetings, 
look up users in the corp directory and then send them emails... 

We set up the initial connection in about 2 minutes, set up the initial 
Exchange user in 2 more minutes...


There is only one giant downside... no MWI. For that you need to buy a 
third party MWI thing (Microsoft is recommending this: mwi2007.com), need 
info on their pricing, BTW...




Jonathan_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070409/23288858/attachment-0001.html