[cisco-voip] BAT update AD users to control phones

[Ryan O'Connell]

Hello all,
 
I'm using CM 5.1, with the DIRSYNC/Authenticaiton option turn on so that the CM user database is populated by the customers Active Directory. I'm looking for a way to use BAT to bulk associated phones to users. It seems as though the only way to do this association is when you're actually creating users. In my case the users are already there all I want to do is update them with the Mac Address of the phone they are going to be controlling. 
 
I found this link that seems to be how one would do this, but when I look at the BAT.XLT file it doesn't have a feild for MAC address. http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/5_0/bulk_adm/5_0_4/t04upusr.htm#wp1343134
 
 
Thanks Ryno

Attention:

Privileged/Confidential Information may be contained in this message.  Disclosure to any person other than the named recipient is unauthorized.  If you are not the intended recipient, please delete all copies of this information and kindly notify the sender by reply email.  Opinions, conclusions and other information in this message that do not relate to the official business of UNIS LUMIN Inc. shall be understood as neither given nor endorsed by it.  UNIS LUMIN Inc. and any of its subsidiaries reserve the right to monitor all e-mail communications through its networks.  Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070409/22f6b64b/attachment.html