[cisco-voip] Change default 'unknown'

[Riley, Andrew]

Hi there, 
 
Does anyone know if its possible to change the default text of 'unknown'
when a call is received inbound from a source with no CLI? I am using an
MGCP gateway. 
 
I would like to change the text to something like 'unclassified'  is
this possible. I could not find a CM service param do reflect anything
different. 

Cheers
 

Andrew Riley 
Technical Consultant 
Communication Services 

Getronics Australia Pty Limited
Getronics combines the service capabilities of the original Dutch
company with those of Wang Global, acquired in 1999, and of the Olivetti
systems and services division. We are ranked second worldwide in network
and desktop outsourcing and fourth in network consulting and integration
(Source: IDC 2002-2003).

2 Minna Close
Belrose NSW 2085
Australia
Mob: +61 (0)402 894 793
Fax:  +61 2 9847 7378
Email: andrew.riley at getronics.com

Communication Services | Security Services | Application Services |
Workspace Management Services | Technology Transformation Services
www.getronics.com.au <http://www.getronics.com.au/> 

Please note that whilst we take all care, neither Getronics nor the
sender accepts any responsibility for viruses and it is your
responsibility to scan for viruses. The contents are intended only for
use by the addressee and may contain confidential and/or privileged
material and any use by other than the intended recipient is prohibited.
If you received this in error, please inform the sender and/or addressee
immediately and delete the material.

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070411/3a64c0f8/attachment.html