[cisco-voip] Unity dial input

[Ryan O'Connell]

There is a Bulk Edit utility in the Unity Tools depot that you can use.
 
Ryan

________________________________

From: cisco-voip-bounces at puck.nether.net on behalf of Voll, Scott
Sent: Wed 4/11/2007 10:28 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Unity dial input



I have caused myself some heart ache because of the way we deployed our Voice network.

 

Because the main site was not VoIP originally the receptionist at the remote site was assigned the Operator status.  Then when we moved the main site receptionist over to IP I made them Main-Operator.

 

Now I have the remote receptionist calling me often that a main site user goes to her when they press 0.  then I go into the subscriber and change it to Main-Operator.

 

How can I change multiple subscribers in bulk?

 

The idea is select all users and put the 0 input to Main-Operator then select all the DID's for the remote site and select the Operator for them.  

 

Make sense?

 

Any help would be nice.  I don't want to manually do this for 100's for subscribers.

 

Thanks

 

Scott 


Attention:

Privileged/Confidential Information may be contained in this message.  Disclosure to any person other than the named recipient is unauthorized.  If you are not the intended recipient, please delete all copies of this information and kindly notify the sender by reply email.  Opinions, conclusions and other information in this message that do not relate to the official business of UNIS LUMIN Inc. shall be understood as neither given nor endorsed by it.  UNIS LUMIN Inc. and any of its subsidiaries reserve the right to monitor all e-mail communications through its networks.  Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070411/c9d41dec/attachment.html