[cisco-voip] Change ip address IPCC EXPRESS

[Matt Slaga (US)]

This depends....

 

Are your CAD agents pointing to hostname or IP address?  If they are
pointing to IP address, then you will have to reinstall the agents.
Also, I've seen the need to reboot CallManager to resynch the CTI ports
to the right address.  

 

If you are using the second port for SPAN recording/monitoring, then you
may have to reconfigure the registry for the correct order.

 

 

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of charles george
Sent: Thursday, April 12, 2007 10:53 AM
To: cisco-voip
Subject: [cisco-voip] Change ip address IPCC EXPRESS

 

Hello

 

Can someone tell me the requirements to change the address of the IPCC
Express box. I would think its alot more than just changing the Nic
address. Moving to the same subnet just want to take the address to 10
digits higher. 
  

 Thanks
   Charles
 



-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070412/acf95874/attachment.html