[cisco-voip] FXS ports not appearing

[Craig Staffin]

issue the command dsp tdm pooling under the voice card config

This allows the onboard cards to use the DSP's on the NM

On 4/13/07, Bryan Nowak <n68851 at hotmail.com> wrote:
>
>  Hi,
>
> We have a VIC-4FXS/DID card installed in slot 0 of a 2821.  The router
> recognizes the card (as evidenced by sh diag output), but the voice-ports do
> not appear in the configuration.  We have an NM-HDV2 with a PVDM-64 and
> PVDM-32 on it, and are using a dspfarm on that slot.  I haven't been able to
> find anything that indicates DSPs are required in slot 0 in order to use
> voice-ports, but has anyone else ever had this problem?  Do analog ports
> even use DSPs??
>
> Thanks,
> Bryan
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>


-- 
Craig Staffin
Craig at staffin.org
(H) 262-437-7313
(C) 262-613-6003
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070413/990bbef6/attachment.html