[cisco-voip] FXS ports not appearing

[Bryan Nowak]

Hi,

We have a VIC-4FXS/DID card installed in slot 0 of a 2821.  The router recognizes the card (as evidenced by sh diag output), but the voice-ports do not appear in the configuration.  We have an NM-HDV2 with a PVDM-64 and PVDM-32 on it, and are using a dspfarm on that slot.  I haven't been able to find anything that indicates DSPs are required in slot 0 in order to use voice-ports, but has anyone else ever had this problem?  Do analog ports even use DSPs??

Thanks,
Bryan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070413/0b79b7d7/attachment.html