[cisco-voip] FXS ports not appearing

[Craig Staffin]

Try moving the PVDM's to the onboard slots starting with slot 0.

I have seen it before were this does help.  Also I have seen it where they
get dislodged from the board so try re installing them.

Craig

On 4/13/07, Bryan Nowak <n68851 at hotmail.com> wrote:
>
>  Is a reload required after adding that command?  After making the change,
> the voice-card shows "dspfarm" and the ports still do not appear.  According
> to the router help, the dsp tdm pooling command has replaced dspfarm, so the
> result of seeing dspfarm under the voice-card config makes sense.  I wish
> the missing voice-ports did!  Here's a snippet of the config:
>
> voice-card 0
>  dspfarm
>  dsp services dspfarm
> !
> voice-card 1
>  dspfarm
>  dsp services dspfarm
>
> [SNIP}
>
> control-plane
> !
> !
> !
> voice-port 1/0/0:23
> !
>
> PHL_RTR_10-0-1-253#sh diag
> Slot 0:
>         C2851 Motherboard with 2GE and integrated VPN Port adapter, 2
> ports
>                      0x70: 03 89 56 30 32 20 D9 02 40 C1 FF FF FF FF FF FF
>
>         WIC Slot 0:
>         FXS Voice daughter card (4 port)
>
> Thanks,
> Bryan
>
> ----- Original Message -----
> *From:* Craig Staffin <craig at staffin.org>
> *To:* Bryan Nowak <n68851 at hotmail.com>
> *Cc:* cisco-voip at puck.nether.net
> *Sent:* Friday, April 13, 2007 9:39 AM
> *Subject:* Re: [cisco-voip] FXS ports not appearing
>
> issue the command dsp tdm pooling under the voice card config
>
> This allows the onboard cards to use the DSP's on the NM
>
> On 4/13/07, Bryan Nowak <n68851 at hotmail.com> wrote:
> >
> >  Hi,
> >
> > We have a VIC-4FXS/DID card installed in slot 0 of a 2821.  The router
> > recognizes the card (as evidenced by sh diag output), but the voice-ports do
> > not appear in the configuration.  We have an NM-HDV2 with a PVDM-64 and
> > PVDM-32 on it, and are using a dspfarm on that slot.  I haven't been able to
> > find anything that indicates DSPs are required in slot 0 in order to use
> > voice-ports, but has anyone else ever had this problem?  Do analog ports
> > even use DSPs??
> >
> > Thanks,
> > Bryan
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
>
>
> --
> Craig Staffin
> Craig at staffin.org
> (H) 262-437-7313
> (C) 262-613-6003
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>


-- 
Craig Staffin
Craig at staffin.org
(H) 262-437-7313
(C) 262-613-6003
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070413/72c3a6fc/attachment.html