[cisco-voip] Forward-digits

[Ryan Ratliff]

Have you tested it yet?
By default a dial-peer will strip every digit before the wildcard  
characters.  In your case just leave digit-strip enabled and it will  
work as you want it to.

-Ryan

On Apr 16, 2007, at 7:22 AM, Ahmed Elnagar wrote:

Hello all;

Can anyone provide explantion for the usage of the forward-digits  
dial-peer configuration command. I have a dial peer 67...T and I want  
to remove the 67 before sending the digits to the PSTN.

Thanks and Best Regards

Ahmed A. Elnagar
Network Field Engineer

Advanced Computer Technology (ACT)
16 Fawzy Ramah St.Off Shehab St.Mohandessin, Giza, Egypt
Postal Code:12411 Cairo Egypt

Mob: +2010-2833868
Website: www.act-eg.com
E-mail: aelnagar at act-eg.com
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip