[cisco-voip] MoH with SRST remote sites

[Ryan Ratliff]

The point of the new Region is so that all of your devices will be  
configured to use g.711 to the MOH servers.   This is done so that  
you can use the g711 MOH source streamed from the flash of the  
router.   The whole point of this config is to trick the phones.   
They don't care where the multicast MOH comes from, as long as it  
comes on the IP address and port that CM tells the phone to receive.   
In order for CM to allocate g.711 MOH to the remote site phones the  
region settings between the phone and the MOH servers needs to be set  
to g.711.   If it is not then the CM will tell the phone to listen  
for the MOH on the g.729 port which is not what the router is sending  
to.

-Ryan

On Apr 23, 2007, at 6:30 AM, Johnny Crothers wrote:

Hi everyone,


Just trying to clarify how I should be configuring MoH with SRST sites.


I’m running G711 at CCM site, G729 over the WAN and G711 at the  
remote sites using MGCP gateways with SRST.


I have configured the SRST routers with a MOH filename and a  
Multicast address that is the same as the multicast address used on  
the CCM MoH server


I’m reading the white paper and I see that it states to add another  
Region for the MoH server to ensure that G711 is used at the SRST  
sites. Is this how it is to be read?


I thought the phone would just join the multicast stream provided by  
the SRST router.


Am I wrong in thinking that I do not need to create a separate region  
for the MoH source (Specifying all other regions as G711)?


Thanks in advance for your help!


Johnny



**********************************************************************
Any opinions expressed in the email are those of the individual and  
not necessarily the company. This email and any files transmitted  
with it are confidential and solely for the use of the intended  
recipient. If you are not the intended recipient or the person  
responsible for delivering it to the intended recipient, be advised  
that you have received this email in error and that any  
dissemination, distribution, copying or use is strictly prohibited.

If you have received this email in error, or if you are concerned  
with the content of this email please e-mail to: e- 
security.support at vanco.info

The contents of an attachment to this e-mail may contain software  
viruses which could damage your own computer system. While the sender  
has taken every reasonable precaution to minimise this risk, we  
cannot accept liability for any damage which you sustain as a result  
of software viruses. You should carry out your own virus checks  
before opening any attachments to this e-mail.

Vanco UK Ltd Registered in England No: 2296733 Registered Office:  
John Busch House, 277 London Road, Isleworth, Middlesex TW7 5AX
**********************************************************************
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip