[cisco-voip] CallForwardAll softkey does not work!

[Anthony Kouloglou]

Hi,
when i do it form the web page it DOES work and forwards calls.
When i do it from a softkey it does not let me enter the DN.

-anthony

Matthew Saskin wrote:
> When you configure a call-forward via the ccmuser web page, it lets 
> you enter the number, but does the forward actually work?  In 
> otherwords, set a CFA from the web page, then trying calling the phone 
> to test out the call forward.
>
> Quick guess is that you have a problem with the Call Forward All CSS.
>
> -matt
>
> Anthony Kouloglou wrote:
>> Hi all,
>> i am running CCM 5.0(4). IP phones 7911 run 8.2.1S.
>> All phones have 3xxx numbers and they access outside lines with a 0!# 
>> pattern.
>> When, via the web admin page, i go to an DN and configure a 
>> CallForwardAll destination (Ext 3200) it works fine.
>> When i press the softkey on the phone, after i issue the 3 and 2 (to 
>> CFALL to 3200) i get a fast busy tone.
>> When i press the softkey on the phone an issue a 01234567899# 
>> destination, it works fine!!
>> All the extensions are in the "local" partition, and all DNs have 
>> fullaccess CSS that contain the local partition.
>>
>> What could be possibly going on?
>>
>> Thanks
>> Anthony
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>   
>