[cisco-voip] Doorbell Integration

[Kris Seraphine]

Is it a Valcom V-2901?  I've used them before without problems.  It sounds
like maybe a DTMF relay issue.  Do you have a dtmf method specified under
the voip dial peer?

On 4/24/07, Israel Lang <zephy316 at gmail.com> wrote:
>
> Anyone ever do any integrations with a gate or doorbell intercom? In
> essence a person rings the doorbell and phone(s) ring. If the person answers
> during the ring cycle the call is connected and it is a normal intercom line
> (this is working). If the call isn't answered while the line rings (about 5
> rings) then you are suppose to be able to pick up the line and dial ** or ##
> to hit the intercom (This isn't working). The way the wiring scheme shows
> the connection is the CO phone line comes into the intercom circuit board
> and then from the intercom circuit board you connect to your phones (in my
> case I have connected to a FXO port). Normal PSTN calls are working fine.
> Intercom works fine when you catch it as it rings. I can't dial the ** or
> ##.
>
> Anyone ever successfully configure a similar integration? I have done
> numerous paging systems, but nothing like this.
>
> Thanks.
>
> --
> Have a great day!!!!!!!!!!
> zephy316_gmail.com
>
> Replace the _ with an @ symbol
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>


-- 
kris seraphine
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070424/70d9981e/attachment.html