[cisco-voip] Remote site firmware update

[Ryan Ratliff]

First make sure all of the files from the 8-2-1S zip file are on the  
flash of the router.  Then make sure in IOS you allow tftp access to  
them.   Don't go renaming files.

-Ryan

On Apr 26, 2007, at 10:53 AM, Robert Kulagowski wrote:

At a new remote site, I've temporarily configured CME mode on the router
to allow it to be used to upgrade firmware on phones instead of the
phones upgrading over the WAN.  (About 200 phones)

telephony-service
   load 7914 S00105000200
   load 7970 SCCP70.8-2-1S
   load 7936 cmterm_7936.3-3-13-0
   max-ephones 200
   max-dn 200
   ip source-address {ip address} port 2000
   auto assign 1 to 100
   auto assign 1 to 200
   max-conferences 12 gain -6
   transfer-system full-consult
   create cnf-files version-stamp 7960 Apr 25 2007 19:05:29

However, according to #sh cdp nei det on the 3750, some of the phones
seem to be ending up with TERM70.DEFAULT and aren't upgrading.

Is there something I can do to get those phones to move forward?  Can I
just make a copy of SCCP70.8-2-1S, call it TERM70.DEFAULT and make it
available in the TFTP server configuration?

I don't want to brick the phones and have to RMA them, because that
would make me sad.

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip