[cisco-voip] Remote site firmware update

[Robert Kulagowski]

At a new remote site, I've temporarily configured CME mode on the router 
to allow it to be used to upgrade firmware on phones instead of the 
phones upgrading over the WAN.  (About 200 phones)

telephony-service
  load 7914 S00105000200
  load 7970 SCCP70.8-2-1S
  load 7936 cmterm_7936.3-3-13-0
  max-ephones 200
  max-dn 200
  ip source-address {ip address} port 2000
  auto assign 1 to 100
  auto assign 1 to 200
  max-conferences 12 gain -6
  transfer-system full-consult
  create cnf-files version-stamp 7960 Apr 25 2007 19:05:29

However, according to #sh cdp nei det on the 3750, some of the phones 
seem to be ending up with TERM70.DEFAULT and aren't upgrading.

Is there something I can do to get those phones to move forward?  Can I 
just make a copy of SCCP70.8-2-1S, call it TERM70.DEFAULT and make it 
available in the TFTP server configuration?

I don't want to brick the phones and have to RMA them, because that 
would make me sad.