[cisco-voip] Bogen TAM-B -> FXO/FXS?

[Lelio Fulgenzi]

We use a TAM-B to interface from a VG248 into an overhead paging system. Works without a hitch. There are settings on the TAM-B that will help in many situations.

--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
...there's no such thing as a bad timbit...

  ----- Original Message ----- 
  From: Johan Bloemhard 
  To: cisco-voip at puck.nether.net 
  Sent: Friday, April 27, 2007 1:08 PM
  Subject: [cisco-voip] Bogen TAM-B -> FXO/FXS?


  I've searched through the archives and it almost seems that the Bogen TAM-B can be connected via FXO or FXS (with some limitations depending on the system)?

   

  I've read that it can be tricky to kill the stream in an FXS or FXO and it just keeps looping. Ultimately we would want to dial a DN and have the system forward DTMF zone code. I'm assuming that this would be dial-peer rules in this configuration? This seems to me to be an FXS configuration.

   

  Anyone have a TAM-B working in either of these configurations?  If so, what are the limitations?

   

  TIA!

   

  Johan Bloemhard 
  ___________________________________ 
  Silver Falls School District 4J 
  802 Schlador Street 
  Silverton, OR 97381 
  w: 503.873.6331 

   



------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070427/09adbc66/attachment.html