[cisco-voip] Bogen TAM-B -> FXO/FXS?

[Paul Choi]

Johan,

I've setup a TAM-B module with CCM off of an FXO card
as well as using a ATA device. It's not that tricky
and you shouldn't have many problems setting it up. If
it doesn't work the first time around you probably
have tip and ring reversed.

Paul


--- Johan Bloemhard
<bloemhard_johan at silverfalls.k12.or.us> wrote:

> I've searched through the archives and it almost
> seems that the Bogen
> TAM-B can be connected via FXO or FXS (with some
> limitations depending
> on the system)?
> 
>  
> 
> I've read that it can be tricky to kill the stream
> in an FXS or FXO and
> it just keeps looping... Ultimately we would want to
> dial a DN and have
> the system forward DTMF zone code. I'm assuming that
> this would be
> dial-peer rules in this configuration? This seems to
> me to be an FXS
> configuration.
> 
>  
> 
> Anyone have a TAM-B working in either of these
> configurations?  If so,
> what are the limitations?
> 
>  
> 
> TIA!
> 
>  
> 
> Johan Bloemhard 
> ___________________________________ 
> Silver Falls School District 4J 
> 802 Schlador Street 
> Silverton, OR 97381 
> w: 503.873.6331 
> 
>  
> 
> > _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com