[cisco-voip] Remote site firmware update
Paul Choi
asobihoudai at yahoo.com
Sun Apr 29 01:22:24 EDT 2007
Underneath telephony-service configuration, you'd want
to enter 'reset all' to do a reset on your phones...OR
you can reset by the type of phone if you need to if I
remember correctly.
Paul
--- Robert Kulagowski <bob at smalltime.com> wrote:
> Ryan Ratliff wrote:
> > First make sure all of the files from the 8-2-1S
> zip file are on the
> > flash of the router. Then make sure in IOS you
> allow tftp access to
> > them. Don't go renaming files.
>
> Thanks - I had forgotten about the .zip file and had
> just copied over
> the files from the tftp path of the Publisher. I
> still need to get
> those phones reset (doing a shut / no shut on the
> port doesn't kick them
> into "Try again" mode).
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
More information about the cisco-voip
mailing list