[cisco-voip] Remote site firmware update

[Paul Choi]

What have you for your tftp-server configuration?

Paul
--- Robert Kulagowski <bob at smalltime.com> wrote:

> At a new remote site, I've temporarily configured
> CME mode on the router 
> to allow it to be used to upgrade firmware on phones
> instead of the 
> phones upgrading over the WAN.  (About 200 phones)
> 
> telephony-service
>   load 7914 S00105000200
>   load 7970 SCCP70.8-2-1S
>   load 7936 cmterm_7936.3-3-13-0
>   max-ephones 200
>   max-dn 200
>   ip source-address {ip address} port 2000
>   auto assign 1 to 100
>   auto assign 1 to 200
>   max-conferences 12 gain -6
>   transfer-system full-consult
>   create cnf-files version-stamp 7960 Apr 25 2007
> 19:05:29
> 
> However, according to #sh cdp nei det on the 3750,
> some of the phones 
> seem to be ending up with TERM70.DEFAULT and aren't
> upgrading.
> 
> Is there something I can do to get those phones to
> move forward?  Can I 
> just make a copy of SCCP70.8-2-1S, call it
> TERM70.DEFAULT and make it 
> available in the TFTP server configuration?
> 
> I don't want to brick the phones and have to RMA
> them, because that 
> would make me sad.
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com