[cisco-voip] Cisco ATA 186 dropping calls...

[Jonathan Charles]

Go to [ip add]/dev (standard ATA web page and see the new ATA web page
(looks like an IP phone page, but you can edit stuff)...

Click on SCCP parameters on the left...

You will see the following:


*SID0* *SID1* *CallManager0* *CallManager1* *MediaPort* Warning: Clicking
[apply] MAY reset the ATA.

Change SID1 to look like the above (replace the . with a 0, if the capture
didn't come thru...)



Jonathan

On 4/29/07, Vince Loschiavo <vloschiavo at data-corporation.com> wrote:
>
> What did they have you do to disable the second port?
> Regards,
>
> Vince Loschiavo
> Senior Cisco Engineer
> DATACORP
> 7862821164
>
> Sent via BlackBerry from T-Mobile
>
> -----Original Message-----
> From: "Jonathan Charles" <jonvoip at gmail.com>
> Date: Sun, 29 Apr 2007 16:37:01
> To:vloschiavo at data-corporation.com
> Cc:ciscovoip <cisco-voip at puck.nether.net>
> Subject: Re: [cisco-voip] Cisco ATA 186 dropping calls...
>
> OK,
>
> I opened a TAC case and found out why it was hosed...
>
> Apparently with CCM5.1, the ATA 186 resets constantly (very quickly) when
> the second port is not disabled (if there is nothing plugged into it)...
>
>
>
> Jonathan
>
>
> On 4/29/07, Vince Loschiavo <vloschiavo at data-corporation.com: <mailto:
> vloschiavo at data-corporation.com> > wrote: It's a firmware. Search CCO for
> it.
>
> Regards,
>
> Vince Loschiavo
> Senior Cisco Engineer
> DATACORP
> 7862821164
>
> Sent via BlackBerry from T-Mobile
>
> -----Original Message-----
> From: "Jonathan Charles" <jonvoip at gmail.com: <mailto:jonvoip at gmail.com> >
> Date: Sat, 28 Apr 2007 21:12:17
> To:"Vince Loschiavo" <VLoschiavo at data-corporation.com: <mailto:
> VLoschiavo at data-corporation.com> >
> Cc:ciscovoip <cisco-voip at puck.nether.net: <mailto:
> cisco-voip at puck.nether.net> >
> Subject: Re: [cisco-voip] Cisco ATA 186 dropping calls...
>
> How would I change it?
>
>
>
> Jonathan
>
>
> On 4/28/07, Vince Loschiavo <VLoschiavo at data-corporation.com
> : <mailto:VLoschiavo at data-corporation.com>
> : <mailto:VLoschiavo at data-corporation.com: <mailto:
> VLoschiavo at data-corporation.com> > > wrote:
>
>
> Try the H.323 code…I've heard people have had better luck.
>
>
>
>
>
>
>
>
> ____________________________________________________________
> Vincent Loschiavo
> Senior Consultant
> Datacorp
> 18503 Pines Blvd, Suite 212, Pembroke Pines, FL, 33029
> "Cisco Advanced Unified Communications Partner"
> Cell Phone: 786-282-1164
> Office Phone: 305-594-6933
> ____________________________________________________________
>
>
>
> ----------------
>
> From:
> cisco-voip-bounces at puck.nether.net: <mailto:
> cisco-voip-bounces at puck.nether.net> : <mailto:
> cisco-voip-bounces at puck.nether.net: <mailto:
> cisco-voip-bounces at puck.nether.net> >[mailto:
> cisco-voip-bounces at puck.nether.net
> : <mailto:cisco-voip-bounces at puck.nether.net> : <mailto:
> cisco-voip-bounces at puck.nether.net: <mailto:
> cisco-voip-bounces at puck.nether.net> > ] On Behalf Of Jonathan Charles
> Sent: Saturday, April 28, 2007 2:42 PM
> To: ciscovoip
> Subject: [cisco-voip] Cisco ATA 186 dropping calls...
>
>
>
>
> We just dropped an IPT solution into a customer, everything is working
> fine...
>
> However, the ATA-186s are dropping calls after 20 minutes (we had one call
> last 30 minutes, but that was the flyer).
>
> CallManager is running 5.1.1b, ATA is SCCP running S/W Version3.02.03
> (051201A)
>
> This is a deal-breaker for the customer, the ATAs all have conference
> phones plugged into them.
>
>
>
> Jonathan
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070430/79478a9a/attachment-0001.html