[cisco-voip] Cisco ATA 186 dropping calls...

Kalle Tetto tettokalle at hotmail.com
Mon Apr 30 02:27:43 EDT 2007


You have to go the ATA Webinterface and disable the second Port there. 
Sorry I can't remember the setting, but It is easy to find.

One question for that, last time I wanted to do this, I can't connect 
and the ATA did a reboot. Do you have heard of that? Does anyone know a 
workaround?

Cheers

Vince Loschiavo schrieb:
> What did they have you do to disable the second port?
> Regards,
> 
> Vince Loschiavo
> Senior Cisco Engineer
> DATACORP
> 7862821164
> 
> Sent via BlackBerry from T-Mobile    
> 
> -----Original Message-----
> From: "Jonathan Charles" <jonvoip at gmail.com>
> Date: Sun, 29 Apr 2007 16:37:01 
> To:vloschiavo at data-corporation.com
> Cc:ciscovoip <cisco-voip at puck.nether.net>
> Subject: Re: [cisco-voip] Cisco ATA 186 dropping calls...
> 
> OK,
> 
> I opened a TAC case and found out why it was hosed...
> 
> Apparently with CCM5.1, the ATA 186 resets constantly (very quickly) when the second port is not disabled (if there is nothing plugged into it)...
>  
> 
> 
> Jonathan
> 
> 
> On 4/29/07, Vince Loschiavo <vloschiavo at data-corporation.com: <mailto:vloschiavo at data-corporation.com> > wrote: It's a firmware. Search CCO for it.
> 
> Regards,
> 
> Vince Loschiavo
> Senior Cisco Engineer 
> DATACORP
> 7862821164
> 
> Sent via BlackBerry from T-Mobile
> 
> -----Original Message-----
> From: "Jonathan Charles" <jonvoip at gmail.com: <mailto:jonvoip at gmail.com> >
> Date: Sat, 28 Apr 2007 21:12:17 
> To:"Vince Loschiavo" <VLoschiavo at data-corporation.com: <mailto:VLoschiavo at data-corporation.com> >
> Cc:ciscovoip <cisco-voip at puck.nether.net: <mailto:cisco-voip at puck.nether.net> >
> Subject: Re: [cisco-voip] Cisco ATA 186 dropping calls...
> 
> How would I change it?
> 
> 
> 
> Jonathan
> 
> 
> On 4/28/07, Vince Loschiavo <VLoschiavo at data-corporation.com
> : <mailto:VLoschiavo at data-corporation.com> 
> : <mailto:VLoschiavo at data-corporation.com: <mailto:VLoschiavo at data-corporation.com> > > wrote:
> 
> 
> Try the H.323 code…I've heard people have had better luck.
> 
> 
> 
> 
> 
> 
>  
> 
> ____________________________________________________________
>  Vincent Loschiavo
>  Senior Consultant
>  Datacorp
>  18503 Pines Blvd, Suite 212, Pembroke Pines, FL, 33029
>  "Cisco Advanced Unified Communications Partner" 
>  Cell Phone: 786-282-1164
>  Office Phone: 305-594-6933
> ____________________________________________________________
> 
> 
> 
> ----------------
> 
> From: 
> cisco-voip-bounces at puck.nether.net: <mailto:cisco-voip-bounces at puck.nether.net> : <mailto:cisco-voip-bounces at puck.nether.net: <mailto:cisco-voip-bounces at puck.nether.net> >  [mailto:
> cisco-voip-bounces at puck.nether.net
> : <mailto:cisco-voip-bounces at puck.nether.net> : <mailto:cisco-voip-bounces at puck.nether.net: <mailto:cisco-voip-bounces at puck.nether.net> > ] On Behalf Of Jonathan Charles
>  Sent: Saturday, April 28, 2007 2:42 PM
>  To: ciscovoip
>  Subject: [cisco-voip] Cisco ATA 186 dropping calls... 
> 
> 
> 
> 
> We just dropped an IPT solution into a customer, everything is working fine...
> 
>  However, the ATA-186s are dropping calls after 20 minutes (we had one call last 30 minutes, but that was the flyer). 
> 
>  CallManager is running 5.1.1b, ATA is SCCP running S/W Version3.02.03(051201A)
> 
>  This is a deal-breaker for the customer, the ATAs all have conference phones plugged into them.
> 
> 
> 
>  Jonathan
> 
>  
>  



More information about the cisco-voip mailing list