[cisco-voip] FXS with DID = unregistered

[Scott Voll]

3845 with EVM-HD running 12.4 code.

I'm trying to do it via CCM.

Scott


On 8/2/07, Paul Choi <asobihoudai at yahoo.com> wrote:
>
> First of all, what kind of VG is this? VG248? VG224?
>
> VG248 ports can be assigned DNs on the VG itself as
> well as under CCM.
>
>
> --- Scott Voll <svoll.voip at gmail.com> wrote:
>
> > I've never used a FXS on a VGW before.  Always used
> > ATA's.
> >
> > so I have a EVM-HD and I setup the first FXS port.
> > it registers just fine.
> > I put a analog phone on it and it works but has no
> > DN so I can't call it.
> >
> > CM 5.1.2 I place a DN on the FXS port and it goes
> > unregistered and will not
> > register.  Am I doing something wrong?
> >
> > Through me a bone.
> >
> > Many thanks
> >
>
>
>
>
>
> ____________________________________________________________________________________
> Need a vacation? Get great deals
> to amazing places on Yahoo! Travel.
> http://travel.yahoo.com/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070802/6c860ab7/attachment.html