[cisco-voip] FXS with DID = unregistered

[Paul Choi]

Call control protocol ->

H.323? MGCP? SIP? Must be MGCP since you're trying to
control the port via CCM.

--- Scott Voll <svoll.voip at gmail.com> wrote:

> 3845 with EVM-HD running 12.4 code.
> 
> I'm trying to do it via CCM.
> 
> Scott
> 
> 
> On 8/2/07, Paul Choi <asobihoudai at yahoo.com> wrote:
> >
> > First of all, what kind of VG is this? VG248?
> VG224?
> >
> > VG248 ports can be assigned DNs on the VG itself
> as
> > well as under CCM.
> >
> >
> > --- Scott Voll <svoll.voip at gmail.com> wrote:
> >
> > > I've never used a FXS on a VGW before.  Always
> used
> > > ATA's.
> > >
> > > so I have a EVM-HD and I setup the first FXS
> port.
> > > it registers just fine.
> > > I put a analog phone on it and it works but has
> no
> > > DN so I can't call it.
> > >
> > > CM 5.1.2 I place a DN on the FXS port and it
> goes
> > > unregistered and will not
> > > register.  Am I doing something wrong?
> > >
> > > Through me a bone.
> > >
> > > Many thanks
> > >
> >
> >
> >
> >
> >
> >
>
____________________________________________________________________________________
> > Need a vacation? Get great deals
> > to amazing places on Yahoo! Travel.
> > http://travel.yahoo.com/
> >
> 



       
____________________________________________________________________________________
Be a better Heartthrob. Get better relationship answers from someone who knows. Yahoo! Answers - Check it out. 
http://answers.yahoo.com/dir/?link=list&sid=396545433