[cisco-voip] UCM 6.X Intercom

[Jason Aarons (US)]

I understand it requires using a line on a phone, so if your 7941 has a
dn on both lines already you can't use Intercom unless you remove a
line. Can anyone vouch for this?

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Carter, Bill
Sent: Monday, August 13, 2007 3:41 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] UCM 6.X Intercom

 
 
Can the UCM 6.X Intercom feature be used for paging to the phones?
Where 1 user could send a page to all IP Phones ?
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.