[cisco-voip] UCM 6.X Intercom

[Carter, Bill]

That is correct.  An Intercom line occupies 1 dedication button on a
phone. 

-----Original Message-----
From: Jason Aarons (US) [mailto:jason.aarons at us.didata.com] 
Sent: Monday, August 13, 2007 2:51 PM
To: Carter, Bill; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] UCM 6.X Intercom

I understand it requires using a line on a phone, so if your 7941 has a
dn on both lines already you can't use Intercom unless you remove a
line. Can anyone vouch for this?

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Carter, Bill
Sent: Monday, August 13, 2007 3:41 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] UCM 6.X Intercom

 
 
Can the UCM 6.X Intercom feature be used for paging to the phones?
Where 1 user could send a page to all IP Phones ?
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain confidential
and privileged information and is for use by the designated addressee(s)
named above only.  If you are not the intended addressee, you are hereby
notified that you have received this communication in error and that any
use or reproduction of this email or its contents is strictly prohibited
and may be unlawful.  If you have received this communication in error,
please notify us immediately by replying to this message and deleting it
from your computer. Thank you.