[cisco-voip] CM6 CallManager service will not stay running

[Wes Sisk]

No alarm in the application syslog or CM traces when it shuts down? /wes

Ted Nugent wrote:
> Hey Guys
> I've got a FRESH install of CM 6.01 which I've
> attempted on both VMWare and a legitimate MCS and both
> are reacting the same way. After the install is
> complete I go to activate the "default" services and
> the CM service runs for about 30 seconds and bombs all
> other services remain running fine. I've read that
> this is expected behavior on an upgrade however this
> is a fresh install from the ground up so it SHOULD use
> the "starter license"?? What am I missing? Any one
> else run into this?
>
> >From 6.01 Release Notes:
> Starter Licenses
> Cisco Unified Communications Manager comes
> preinstalled with starter licenses, so a file upload
> is not required. Starter licenses have no expiration
> date and are available in limited quantities. Be aware
> that starter licenses are only available for fresh
> installations; they are not available for upgrades or
> migrations from previous releases. Starter licenses
> support only one Cisco Unified Communications Manager
> node and up to 50 device license units.
>
>
> Thanks
> Ted
>
>
>        
> ____________________________________________________________________________________
> Yahoo! oneSearch: Finally, mobile search 
> that gives answers, not web links. 
> http://mobile.yahoo.com/mobileweb/onesearch?refer=1ONXIC
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>