[cisco-voip] a comparison of CCME configuration methods

[zohaib shabir]

Actually i had the experience of working both with QCT and through web
interface. I really like the QCT method because it saves a lot of time, and
it works perfectly on almost all routers.

On 8/17/07, Paul Choi <asobihoudai at yahoo.com> wrote:
>
> There are three ways of configuring CCME, four if you
> count QCT. I have only used the manual method and the
> semi-automatic method with using ephone auto-reg. I
> wanted to hear anyone's take on the other methods, in
> particular, QCT/fully-automated installation where you
> walk through a "wizard."
>
> I find the ephone auto-reg to be quite useful. I
> wanted to try the "wizard"-based configuration also
> but wanted to hear others opinions on it first.
>
> Paul
>
>
>
>
> ____________________________________________________________________________________
> Building a website is a piece of cake. Yahoo! Small Business gives you all
> the tools to get online.
> http://smallbusiness.yahoo.com/webhosting
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>



-- 
Regards,
Zohaib Shabir
Network Engineer(Voice)
DWP Group, TECH Division
Ph:+92-302-8232689
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070818/382f17f7/attachment.html