[cisco-voip] changing caller id
Patrick Fischer
myciscovoip at gmail.com
Wed Aug 15 11:03:30 EDT 2007
Hi Shaan
It depends on your provider. Ususally you should use "clid restrict" in your
dial-peer config. What you can do using voice translation rules is to send
out nothing. (rule 1 /1234/ //) But in many cases the provider will then
show your main number.
Regards,
Patrick
2007/8/15, Shanawaz <shanawaz at gmail.com>:
>
> Patrick,
>
> Can I send an 'unknown' caller ID the same way?
>
> Thanks,
> Shaan
>
>
> On 8/15/07, Patrick Fischer <myciscovoip at gmail.com> wrote:
> >
> > Hi Mani,
> >
> > simply add another voice translation rule containing the translations
> > you want to have and add "translate calling <id>" to your voice
> > translation-profile profile2. That's it.
> >
> > Regards,
> > Patrick
> >
> >
> > 2007/8/14, Pezhman Lali <pezhman_lali at yahoo.com>:
> > >
> > > dear
> > > thanks for your reply.
> > > the config is:
> > >
> > > !
> > > version 12.2
> > > service timestamps debug uptime
> > > service timestamps log uptime
> > > no service password-encryption
> > > !
> > > hostname test
> > > !
> > > enable password 111111
> > > !
> > > username admin password 0 111111
> > > voice-card 1
> > > !
> > > aaa new-model
> > > !
> > > !
> > > aaa authentication login default local
> > > aaa authentication login vty local
> > > aaa authentication login h323 group radius
> > > aaa authentication login con none
> > > aaa authorization exec default local
> > > aaa authorization exec vty local
> > > aaa authorization exec h323 group radius
> > > aaa accounting connection h323 start-stop group radius
> > > aaa session-id common
> > > ip subnet-zero
> > > !
> > > !
> > > no ip domain lookup
> > > ip name-server 4.2.2.4
> > > !
> > > isdn switch-type primary-net5
> > > !
> > > !
> > > voice rtp send-recv
> > > !
> > > voice class codec 10
> > > codec preference 1 g723r53
> > > codec preference 2 g723r63
> > > codec preference 3 g723ar53
> > > codec preference 4 g723ar63
> > > codec preference 6 g729br8
> > > !
> > > !
> > > !
> > > !
> > > !
> > > !
> > > voice class custom-cptone test
> > > dualtone busy
> > > frequency 425 425
> > > cadence 500 500
> > > dualtone ringback
> > > frequency 425 425
> > > cadence 1000 4000
> > > dualtone reorder
> > > frequency 425 425
> > > cadence 1000 1000
> > > dualtone out-of-service
> > > frequency 950
> > > cadence 330 330
> > > dualtone number-unobtainable
> > > frequency 425
> > > cadence 240 240
> > > dualtone disconnect
> > > frequency 425 425
> > > cadence 250 250
> > > !
> > > !
> > > !
> > > !
> > > voice translation-rule 1
> > > rule 1 /^2/ /2197121112/
> > > rule 2 /^1/ /2197121111/
> > > rule 3 /^3/ /2197121113/
> > > rule 4 /^4/ /2197121114/
> > > rule 5 /^5/ /2197121115/
> > > rule 6 /^6/ /2197121116/
> > > rule 7 /^7/ /2197121117/
> > > rule 8 /^8/ /2197121118/
> > > rule 9 /^9/ /2197121119/
> > > rule 10 /^0/ /2197121110/
> > > !
> > > voice translation-rule 2
> > > rule 1 /^25221/ //
> > > rule 2 /^252/ /0/
> > > !
> > > !
> > > voice translation-profile profile1
> > > translate called 1
> > > !
> > > voice translation-profile profile2
> > > translate called 2
> > > !
> > > !
> > > mta receive maximum-recipients 0
> > > !
> > > controller E1 1/0
> > > framing NO-CRC4
> > > clock source line primary
> > > line-termination 75-ohm
> > > pri-group timeslots 1-31
> > > !
> > > controller E1 1/1
> > > shutdown
> > > framing NO-CRC4
> > > line-termination 75-ohm
> > > !
> > > translation-rule 1
> > > !
> > > translation-rule 2
> > > !
> > > !
> > > !
> > > !
> > > interface FastEthernet0/0
> > > ip address 85.1.1.2 255.255.255.0
> > > duplex auto
> > > speed auto
> > > !
> > > interface Serial1/0:15
> > > no ip address
> > > no logging event link-status
> > > isdn switch-type primary-net5
> > > isdn incoming-voice voice
> > > no cdp enable
> > > !
> > > ip default-gateway 85.1.1.1
> > > ip classless
> > > ip route 0.0.0.0 0.0.0.0 85.1.1.1
> > > no ip http server
> > > ip pim bidir-enable
> > > !
> > > !
> > > access-list 102 deny tcp any any eq 4444
> > > access-list 102 deny tcp any any eq 593
> > > access-list 102 deny tcp any any eq 445
> > > access-list 102 deny tcp any any eq 139
> > > access-list 102 deny tcp any any eq 135
> > > access-list 102 deny udp any any eq tftp
> > > access-list 102 deny udp any any eq netbios-dgm
> > > access-list 102 deny udp any any eq 135
> > > access-list 102 permit tcp any any eq telnet
> > > access-list 102 permit ip any any
> > > access-list 102 permit tcp any any
> > > access-list 102 permit udp any any
> > > !
> > >
> > > radius-server host 85.1.1.3 auth-port 1812 acct-port
> > > 1813 key test
> > > radius-server authorization permit missing
> > > Service-Type
> > > radius-server vsa send accounting
> > > radius-server vsa send authentication
> > > call rsvp-sync
> > > !
> > > call application voice cidial flash:cidial.tcl
> > > call application voice cidial language 0 en
> > > call application voice cidial set-location fa 0 flash:
> > > !
> > > voice-port 1/0:15
> > > !
> > > !
> > > mgcp profile default
> > > !
> > > !
> > > !
> > > dial-peer cor custom
> > > !
> > > !
> > > !
> > > dial-peer voice 900 voip
> > > session protocol sipv2
> > > session target dns: did.test.com
> > > dtmf-relay rtp-nte
> > > !
> > > dial-peer voice 100 pots
> > > translation-profile outgoing profile2
> > > destination-pattern 252T
> > > clid restrict
> > > port 1/0:15
> > > !
> > > dial-peer voice 1112 pots
> > > !
> > > dial-peer voice 1111 pots
> > > !
> > > dial-peer voice 110 pots
> > > incoming called-number T
> > > direct-inward-dial
> > > !
> > > sip-ua
> > > sip-server ipv4: 217.10.79.219
> > > !
> > > !
> > > line con 0
> > > line aux 0
> > > line vty 0 4
> > > password 11111
> > > !
> > > !
> > > end
> > >
> > > --- zohaib shabir < zohaibshabir at gmail.com> wrote:
> > >
> > > > Yes
> > > > you can always change the callerid of calls if you
> > > > have the PRI line for the
> > > > pstn. I dont know you config, but i am sure you if
> > > > you share the config with
> > > > me, i will be able to help you out.
> > > >
> > > > On 8/14/07, Pezhman Lali < pezhman_lali at yahoo.com >
> > > > wrote:
> > > > >
> > > > > Hi dears
> > > > > I have a cisco2600+nm-hdv+pri line(E1).
> > > > > is any way to change callerid of outgoing calls to
> > > > the
> > > > > pstn.
> > > > > best
> > > > > Mani
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > >
> > > ____________________________________________________________________________________
> > > > > Boardwalk for $500? In 2007? Ha! Play Monopoly
> > > > Here and Now (it's updated
> > > > > for today's economy) at Yahoo! Games.
> > > > >
> > > >
> > > http://get.games.yahoo.com/proddesc?gamekey=monopolyherenow
> > > > > _______________________________________________
> > > > > cisco-voip mailing list
> > > > > cisco-voip at puck.nether.net
> > > > >
> > > > https://puck.nether.net/mailman/listinfo/cisco-voip
> > > > >
> > > >
> > > >
> > > >
> > > > --
> > > > Regards,
> > > > Zohaib Shabir
> > > > Network Engineer(Voice)
> > > > DWP Group, TECH Division
> > > > Ph:+92-302-8232689
> > > >
> > >
> > >
> > >
> > >
> > > ____________________________________________________________________________________Ready
> > > for the edge of your seat?
> > > Check out tonight's top picks on Yahoo! TV.
> > > http://tv.yahoo.com/
> > > _______________________________________________
> > > cisco-voip mailing list
> > > cisco-voip at puck.nether.net
> > > https://puck.nether.net/mailman/listinfo/cisco-voip
> > >
> >
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070815/1ae9aee7/attachment.html
More information about the cisco-voip
mailing list