[cisco-voip] SemiOT: Roll your own point to point PRI?

[Dark Fiber]

I need to create two point to point PRI's between two locations to tie some
legacy phone/pbx equipment together.

Currently there are some bellsouth PRI's tying the PBX to its remote shelf
at a remote location, however the location is going to be moving and we want
to get some setup to the new location that will leverage the network and
some cisco gear to do this rather then have to depend on bellsouth.

Its not going to be managed or part of CallManager in any way.   I suspect
one could accomplish this with a couple of routers and FXO/FXS cards or
something.  But I may be way off.

Any thoughts?  Not sure what to call doing this, so I am having a difficult
time searching to find anything to read or to look for examples.

Any suggestions or links would be appreciated.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070820/a06f8151/attachment-0001.html