[cisco-voip] SemiOT: Roll your own point to point PRI?

[TechGuy]

>
> I need to create two point to point PRI's between two locations to tie
> some legacy phone/pbx equipment together.
>
> Currently there are some bellsouth PRI's tying the PBX to its remote shelf
> at a remote location, however the location is going to be moving and we want
> to get something setup at the new location that will leverage the network
> and some cisco gear to do this rather then have to depend on bellsouth.
>
> Its not going to be managed or part of CallManager in any way.   I suspect
> one could accomplish this with a couple of routers and FXO/FXS cards or
> something.  But I may be way off.
>
> Any thoughts?  Not sure what to call doing this, so I am having a
> difficult time searching to find anything to read or to look for examples.
>
> Any suggestions or links would be appreciated.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070820/f2841cfc/attachment-0001.html