[cisco-voip] Intl Calls with Verizon in Philadelphia area

[CarlosOrtiz at bayviewfinancial.com]

I am not able to send International calls through our PRI's at a location 
outside of Philly.  Local and LD work fine.  debugs at the router show the 
number being sent to the telco are fine. 

Debug ISDN q931

Calling Party Number i = 0x2181, '215664XXXX' 
                Plan:ISDN, Type:National 
        Called Party Number i = 0x91, '011448458787000'

I found a CCO TAC case where this exact problem is described and addressed 
by changing the calling plan type from national to unknown using the 
following command under the D channel interface.

isdn map address .* plan isdn type unknown

This did in fact change the plan type but I was unable to complete local, 
LD and Intl after adding this.

Any suggestions?

Carlos







-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070831/e42ecece/attachment.html