[cisco-voip] Intl Calls with Verizon in Philadelphia area

[Justin Steinberg]

isdn map address 011* plan isdn type unknown

On 8/31/07, CarlosOrtiz at bayviewfinancial.com <
CarlosOrtiz at bayviewfinancial.com> wrote:
>
>
> I am not able to send International calls through our PRI's at a location
> outside of Philly.  Local and LD work fine.  debugs at the router show the
> number being sent to the telco are fine.
>
> Debug ISDN q931
>
> Calling Party Number i = 0x2181, '215664XXXX'
>                 Plan:ISDN, Type:National
>         Called Party Number i = 0x91, '011448458787000'
>
> I found a CCO TAC case where this exact problem is described and addressed
> by changing the calling plan type from national to unknown using the
> following command under the D channel interface.
>
> *isdn map address .* plan isdn type unknown*
>
> This did in fact change the plan type but I was unable to complete local,
> LD and Intl after adding this.
>
> Any suggestions?
>
> Carlos
>
>
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070831/f5ec900e/attachment.html