[cisco-voip] Intl Calls with Verizon in Philadelphia area

[Justin Steinberg]

actually i didnt read your entire email.  you need to make both plan and
isdn unknown for international since you are sending the leading '011'.

 isdn map address 011.* plan unknown type unknown



On 8/31/07, Justin Steinberg <jsteinberg at gmail.com> wrote:
>
> isdn map address 011* plan isdn type unknown
>
> On 8/31/07, CarlosOrtiz at bayviewfinancial.com <CarlosOrtiz at bayviewfinancial.com>
> wrote:
>
> >
> > I am not able to send International calls through our PRI's at a
> > location outside of Philly.  Local and LD work fine.  debugs at the router
> > show the number being sent to the telco are fine.
> >
> > Debug ISDN q931
> >
> > Calling Party Number i = 0x2181, '215664XXXX'
> >                 Plan:ISDN, Type:National
> >         Called Party Number i = 0x91, '011448458787000'
> >
> > I found a CCO TAC case where this exact problem is described and
> > addressed by changing the calling plan type from national to unknown using
> > the following command under the D channel interface.
> >
> > *isdn map address .* plan isdn type unknown*
> >
> > This did in fact change the plan type but I was unable to complete
> > local, LD and Intl after adding this.
> >
> > Any suggestions?
> >
> > Carlos
> >
> >
> >
> >
> >
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070831/e4093fb9/attachment-0001.html