[cisco-voip] No Hold Key

[STEVEN CASPER]

 I have a few sites where users are complaining that after answering an inbound call no Hold softkey is available. This does not happen all the time only a couple of times a day. These sites use multiple shared lines. We are on 4.1.3.
  I was wondering if the "maximum number of calls" setting could have an effect on this but my understanding is that this setting is per device so even if you have a call on a line that shows up on 15 phones it should only subtract one call from the available call pool. Then again I may be on the completely wrong track. What would cause the Hold soft key to not apear sporadically?
 
Steve

 
 
Steve Casper
Voice Technologies
M&T Bank
(410) 347-6026

************************************
This email may contain privileged and/or confidential information that is intended solely for the use of the addressee.  If you are not the intended recipient or entity, you are strictly prohibited from disclosing, copying, distributing or using any of the information contained in the transmission.  If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy.  This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act and the Sarbanes-Oxley Act.  You may not directly or indirectly reuse or disclose such information for any purpose other than to provide the services for which you are receiving the information.
There are risks associated with the use of electronic transmission.  The sender of this information does not control the method of transmittal or service providers and assumes no duty or obligation for the security, receipt, or third party interception of this transmission.
************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070831/d275dcab/attachment-0001.html