[cisco-voip] CCVP Lab Equipment

[Manoj Kalpage]

Avner,
If you don't mind could you explain how to make PRI emulator using
back to back PRI? Do I need two PRI interfaces for this? Any
information would be appreciated.

Regards,
MK

On Nov 30, 2007 2:59 AM, Avner Izhar <aizhar at ccbootcamp.com> wrote:
>
>
> Hi Syed,
>
> CCVP has 4.x and 5.x in it, you should probably go for call manager 5.x,
> works well on vmware but the licensing might be tricky .
>
> Unity 4.x can be installed on any platform, but it is not in the CCVP
> curriculum (aside from the TUC). CUE is not in there at all.
>
> The installations will not be supported by cisco, but can be used for
> training proposes.
>
> PRI emulators can be replaced by using a back to back pri connection on a
> router, just make sure you take care of clocking and protocol emulation.
>
> HTH,
>
>
>
> -------------------------------------------
> thanks,
> Avner Izhar
> CCIE#15999 (Voice), CCVP, CCSI# 31623
> Technical Instructor
> CCBOOTCAMP - A Cisco Sponsored Organization (SO)
> Email: aizhar at ccbootcamp.com
> Toll Free: 877-654-2243
> Direct: +1-702-968-5100 = Outside the USA
> FAX: +1-702-446-8012
> YES! We take Cisco Learning Credits!
> Register to win a free iPhone! http://www.ccbootcamp.com/iphone.html
>
>  ________________________________
>  From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Syed Khalid Ali
> Sent: Thursday, November 29, 2007 09:29
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] CCVP Lab Equipment [bcc][faked-from]
>
>
>
>
> Hi to all,
>
> Currently I have CCM 4.1(3) running on vmware virtual machine (on Dell
> Optilex GX-270).  2611, 2651XM, 2821 routers.
> 2xFXO (for 2600 series). 2xFXS (2600 series). CCME 3.3. 1xPRI card(which is
> useless since no PRI lines to work with).
> 3xISDN BRI cards . 2-port ISDN BRI emulator. 1x  3560 24Port PoE EMI. 1x
> 3560 24Port EMI.
>
> Now my boss will be ordering NFR for security guys in January 2008 and
> asking me if any thing i need in lab.
> Should I include CCM 5.0 or CCM 6.0 software, which one is better. Also do I
> need to have an MCS server .
> Does CCM5/6  install and run without problems on vmware.
> And what about PRI emulators, Unity Express or Unity. Also Does Unity
> requires an MCS server to run.
>
>
>
>
>
> regards,
>
> syed khalid ali
>
>
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.503 / Virus Database: 269.16.10/1159 - Release Date: 11/29/2007
> 11:10
>
>
>
> No virus found in this outgoing message.
>  Checked by AVG Free Edition.
>  Version: 7.5.503 / Virus Database: 269.16.10/1159 - Release Date:
> 11/29/2007 11:10
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>