[cisco-voip] Using Expansion Modules

[Bill Talley]

Have you enabled presence status on directory listings?  I think its under Enterprise parameters.

You'll also need to set the presence css on each device to one that includes the partition of the line being monitored.

*** Sent from a mobile device with very tiny keys.  Please excuse my typos. ***

-----Original Message-----
From: "rema21 at excite.com" <rema21 at excite.com>
To: "cisco-voip at puck.nether.net" <cisco-voip at puck.nether.net>
Sent: 12/06/07 7:22 AM
Subject: Re: [cisco-voip] Using Expansion Modules





Hi,

we have CUCM-BE and 7960 with one 1714 modul.

We want to use the modul keys as a speed dails and we want the LEDs to light up when the line is available or busy.

For now we're using BLFs but it only gives us a speed dails but no light indicators.

Can it be configured??

Tanks in advanced

_______________________________________________
Join Excite! - http://www.excite.com
The most personalized portal on the Web!


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip