[cisco-voip] Using Expansion Modules

[rema21 at excite.com]

Tnx,


that's how i know if the'tre busy or not. But how are they going to be a speed dails? I need all 14 buttons to be speed dails also.



 --- On Thu 12/06, Jonathan Charles < jonvoip at gmail.com > wrote:
From: Jonathan Charles [mailto: jonvoip at gmail.com]
To: rema21 at excite.com
     Cc: cisco-voip at puck.nether.net
Date: Thu, 6 Dec 2007 07:50:40 -0600
Subject: Re: [cisco-voip] Using Expansion Modules

Yes, configure them as shared lines and set the ring setting to disable.You will need to create a new phone button template to set thesebuttons as lines.JonathanOn Dec 6, 2007 7:19 AM, rema21 at excite.com <rema21 at excite.com> wrote:>>>>> Hi,>> we have CUCM-BE and 7960 with one 1714 modul.>> We want to use the modul keys as a speed dails and we want the LEDs to light up when the line is available or busy.>> For now we're using BLFs but it only gives us a speed dails but no light indicators.>> Can it be configured??>> Tanks in advanced>> _______________________________________________> Join Excite! - http://www.excite.com> The most personalized portal on the Web!>>> _______________________________________________> cisco-voip mailing list> cisco-voip at puck.nether.net> https://puck.nether.net/mailman/listinfo/cisco-voip>

_______________________________________________
Join Excite! - http://www.excite.com
The most personalized portal on the Web!