[cisco-voip] FXO goes to dial tone.

[Nikola Stojsin]

If you are using MGCP, there should be "Attendant DN" option in CM.

 

Nikola

 

 

 

------------------------------
Nikola Stojsin
PhD CCIE #12888
Nikola at att.net
(917) 558-1423

(917) 591-9382 (fax)
------------------------------

 

 

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Voll
Sent: Monday, December 10, 2007 6:42 PM
To: Paul Choi
Cc: ciscovoip
Subject: Re: [cisco-voip] FXO goes to dial tone.

 

is that for H323?  I'm using MGCP.

 

Scott

On Dec 10, 2007 3:21 PM, Paul Choi <asobihoudai at yahoo.com> wrote:

I think the command which you're searching for is
plar.

You likely want the FXO to connect to an internal 
phone number as soon as there's a connection to the
FXO port.


--- Scott Voll <svoll.voip at gmail.com> wrote:

> Sorry for the dumb question but for the life of me I
> can't remember the
> answer. 
>
> I have a FXO on a 2800 vgw that when the call comes
> in rather then go to the
> DN it just gives me Dial tone.  I think there must
> be a command I'm
> forgetting.  the VGW is registered but doesn't 
> transfer to the incoming DN.
>
> TIA
>
> Scott

> > _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip




 
____________________________________________________________________________
________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile.  Try it now.
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
<http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ> 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20071210/eb4cb2dd/attachment.html