[cisco-voip] FXO goes to dial tone.

[Scott Voll]

is that for H323?  I'm using MGCP.

Scott

On Dec 10, 2007 3:21 PM, Paul Choi <asobihoudai at yahoo.com> wrote:

> I think the command which you're searching for is
> plar.
>
> You likely want the FXO to connect to an internal
> phone number as soon as there's a connection to the
> FXO port.
>
> --- Scott Voll <svoll.voip at gmail.com> wrote:
>
> > Sorry for the dumb question but for the life of me I
> > can't remember the
> > answer.
> >
> > I have a FXO on a 2800 vgw that when the call comes
> > in rather then go to the
> > DN it just gives me Dial tone.  I think there must
> > be a command I'm
> > forgetting.  the VGW is registered but doesn't
> > transfer to the incoming DN.
> >
> > TIA
> >
> > Scott
> > > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
>
>  ____________________________________________________________________________________
> Be a better friend, newshound, and
> know-it-all with Yahoo! Mobile.  Try it now.
> http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20071210/d9a05a54/attachment.html