[cisco-voip] FXO goes to dial tone.

[Paul Choi]

I think the command which you're searching for is
plar.

You likely want the FXO to connect to an internal
phone number as soon as there's a connection to the
FXO port.

--- Scott Voll <svoll.voip at gmail.com> wrote:

> Sorry for the dumb question but for the life of me I
> can't remember the
> answer.
> 
> I have a FXO on a 2800 vgw that when the call comes
> in rather then go to the
> DN it just gives me Dial tone.  I think there must
> be a command I'm
> forgetting.  the VGW is registered but doesn't
> transfer to the incoming DN.
> 
> TIA
> 
> Scott
> > _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip



      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ