[cisco-voip] Unity 4.2 Call handlers question

[Jonathan Charles]

The default is to Send to Greeting... so, if you aren't paying careful
attention, it is going to the greeting...


Jonathan

On Dec 13, 2007 1:27 PM, Joel Perez <tman701 at gmail.com> wrote:
> Hey Guys,
>
> Yup that did it. All my other ones have it set up that way I dont know why I
> didnt see it when i was comparing them.
> It is a Directory Handler, lol, just modified for a crazy request from a
> customer.
>
> Thanks again,
>
> Joel P.
>
>
>
>
> On 12/13/07, Scott Voll <svoll.voip at gmail.com> wrote:
> >
> > you need to set them to attempt transfer rather then send to greeting.
> >
> > Also sounds like a dirctory handler not a Call handler ;-)
> >
> > Scott
> >
> >
> >
> > On Dec 13, 2007 10:36 AM, Joel Perez <tman701 at gmail.com> wrote:
> >
> > >
> > >
> > > Hey Guys,
> > >
> > > Ive sort of ran into an issue which im sure has a simple work around, i
> just cant figure it out.
> > > I built a call handler that basically asks callers to type in an
> extension, then it forwards them to it.
> > > When they do, the prompts tell them that the ext is not available and
> asks them to leave a VM.
> > > None of my other Call handlers that i built in the past on this same
> system are doing this, only this new one.
> > > Any help would be appreciated.
> > >
> > > Joel P.
> > >
> > > _______________________________________________
> > > cisco-voip mailing list
> > > cisco-voip at puck.nether.net
> > > https://puck.nether.net/mailman/listinfo/cisco-voip
> > >
> >
> >
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>