[cisco-voip] VG224 and Polycom`s

[Jonathan Charles]

Right, because you are running MGCP instead of SCCP... delete the
VG224, recreate it as SCCP and load 12.4.15T1 on it.



Jonathan

On Dec 17, 2007 7:52 AM, wayne jackson <wayne-jackson at hotmail.co.uk> wrote:
>
>  Thank you for the reply, The current VG are MGCP not SCCP - don`t ask ,
> I`ve also tried to increase the busy trigger and max. calls to 2 but it
> replies back with " busy trigger can not be greater then one because the
> specified device type does not support call waiting"
>
>
>  I tried to create a new analogue type  but can not have more then 1 line
> configured- is the only way SCCP upgrade?
>
>
>
>  thanks
>
> > Date: Mon, 17 Dec 2007 07:39:49 -0600
> > From: jonvoip at gmail.com
> > To: wayne-jackson at hotmail.co.uk
> > Subject: Re: [cisco-voip] VG224 and Polycom`s
> > CC: cisco-voip at puck.nether.net
>
>
> >
> > Wait, MGCP? You should be setting the VG224 up as SCCP....
> >
> >
> > Jonathan
> >
> > On Dec 17, 2007 4:30 AM, wayne jackson <wayne-jackson at hotmail.co.uk>
> wrote:
> > >
> > > I have several VG224 working on MGCP with analogue Polycom`s conference
> > > phones however we are unable to set up a conference call from the actual
> > > phone, if I establish a call and then try to use the hookflash to place
> the
> > > call on hold and then set up a conference it cuts the original person
> off.
> > > The setting on CCM is max. 1 call which makes sense with the current
> fault
> > > but I`m unable to increase it. The only info. I`ve seen points to SCCP
> > > control of the VG`s if I need analogue conference set up not MGCP - is
> this
> > > correct ?. - thanks
> > >
> > > _______________________________________________
> > > cisco-voip mailing list
> > > cisco-voip at puck.nether.net
> > > https://puck.nether.net/mailman/listinfo/cisco-voip
> > >
>
>