[cisco-voip] VG224 and Polycom`s

wayne jackson wayne-jackson at hotmail.co.uk
Mon Dec 17 08:52:34 EST 2007


Thank you for the reply, The current VG are MGCP not SCCP - don`t ask , I`ve also tried to increase the busy trigger and max. calls to 2 but it replies back with " busy trigger can not be greater then one because the specified device type does not support call waiting"
 
 
I tried to create a new analogue type  but can not have more then 1 line configured- is the only way SCCP upgrade?
 
 
 
thanks> Date: Mon, 17 Dec 2007 07:39:49 -0600> From: jonvoip at gmail.com> To: wayne-jackson at hotmail.co.uk> Subject: Re: [cisco-voip] VG224 and Polycom`s> CC: cisco-voip at puck.nether.net> > Wait, MGCP? You should be setting the VG224 up as SCCP....> > > Jonathan> > On Dec 17, 2007 4:30 AM, wayne jackson <wayne-jackson at hotmail.co.uk> wrote:> >> > I have several VG224 working on MGCP with analogue Polycom`s conference> > phones however we are unable to set up a conference call from the actual> > phone, if I establish a call and then try to use the hookflash to place the> > call on hold and then set up a conference it cuts the original person off.> > The setting on CCM is max. 1 call which makes sense with the current fault> > but I`m unable to increase it. The only info. I`ve seen points to SCCP> > control of the VG`s if I need analogue conference set up not MGCP - is this> > correct ?. - thanks> >> > _______________________________________________> > cisco-voip mailing list> > cisco-voip at puck.nether.net> > https://puck.nether.net/mailman/listinfo/cisco-voip> >
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20071217/87321028/attachment.html 


More information about the cisco-voip mailing list