[cisco-voip] show gatekeeper endpoints

[Jason Aarons (US)]

In CCMadmin I setup a Gatekeeper and Trunk and have them register to a
Gatekeeper.

 

On the IOS Gatekeeper I type show gatekeeper endpoint and see my two
Subscribers registered properly.  They are YYZ-SubA-ICT_1 and
YYZ-SubB-ICT_2 in the show gatekeeper endpoint.

 

Where does CallManager/IOS get the _ICT_1 or _ICT_2 from as I don't
configure that.  I know it just does it, but can you change it from
ICT_X to something else?

 

 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20071219/a24fd705/attachment.html