[cisco-voip] show gatekeeper endpoints

[Mike Wydra]

That number is assigned automatically and cannot be changed.

On 12/19/07, Jason Aarons (US) <jason.aarons at us.didata.com> wrote:
>
>  In CCMadmin I setup a Gatekeeper and Trunk and have them register to a
> Gatekeeper.
>
>
>
> On the IOS Gatekeeper I type show gatekeeper endpoint and see my two
> Subscribers registered properly.  They are YYZ-SubA-ICT_1 and YYZ-SubB-ICT_2
> in the show gatekeeper endpoint.
>
>
>
> Where does CallManager/IOS get the _*ICT*_1 or _ICT_2 from as I don't
> configure that.  I know it just does it, but can you change it from ICT_X to
> something else?
>
>
>
>
>
> ------------------------------
>
> *Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee, you
> are hereby notified that you have received this communication in error and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this communication in
> error, please notify us immediately by replying to this message and deleting
> it from your computer. Thank you. *
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20071219/9c37319e/attachment.html