[cisco-voip] Call Manager router failover

Sam Hall SamHall at wiseman-dairies.co.uk
Thu Dec 20 11:56:53 EST 2007


Hi

We are using an H323 gw

Yep configured as you mentioned, see URL's below with screen print of 
Route pattern, Rlist, Rgroup gateway config... remember this manual 
failover worked fine when we were running v3.2

Thanks

http://tinypic.com/view.php?pic=6omybl2&s=1
http://tinypic.com/view.php?pic=72gix5z&s=1
http://tinypic.com/view.php?pic=6p9y3hd&s=1




Sam
----
Sam Hall
Robert Wiseman & Sons
Ext: 6655
Tel: +44 (0)1355 270655
samhall at wiseman-dairies.co.uk
www.wiseman-dairies.co.uk
159 Glasgow Road, East Kilbride, Glasgow, G74 4PA



"Erik Erasmus (E)" <ErasmuE4 at telkom.co.za> 
20/12/2007 10:32

To
"Sam Hall" <SamHall at wiseman-dairies.co.uk>, <cisco-voip at puck.nether.net>
cc

Subject
RE: [cisco-voip] Call Manager router failover






Hi Sam
 
I have a setup with two voicegateways both with two PRIs for rdundancy at 
a site and they work fine using 4-2-3 sr3x
 
we don't swop manual - not sure if this is part of the problem - should 
not be
 
I am using Route pattern, Rlist, Rgroup gateway
 
are you suing h323 or MGCP gateways 
 
 
erik erasmus 

From: cisco-voip-bounces at puck.nether.net on behalf of Sam Hall
Sent: Thu 2007-12-20 12:06
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Call Manager router failover


Hi 

We have two routers at each of our sites, one has our WAN connection 
"xx-2651-1", the other has our ISDN30 "xx-2651-2".  If our ISDN 30 router 
hardware fails, we physically move the ISDN 30 cable from "xx-2651-2" to 
"xx-2651-1".  In CM 3.2 this automagically worked as we have both routers 
configured in CM's "Route Group config". 

Now in CM 4.2(3) after an upgrade this doesn't seem to work any more; the 
only way to get this to work is to manually move the cable and then swap 
the priority of the two selected devices in CM's "Route Group config", 
then all calls route in and out as expected. 

If we don't swap the priority the below happens: 

1) external > inbound are accepted and routed as normal 
2) internal > internal are accepted and routed as normal 
3) internal > external get an engaged tone 
4) "csim start" simulated calls from the router i.e internal > external 
work fine as well 

Any ideas would be appreciated. 


Sam
----
Sam Hall
Robert Wiseman & Sons
Ext: 6655
Tel: +44 (0)1355 270655
samhall at wiseman-dairies.co.uk
www.wiseman-dairies.co.uk
159 Glasgow Road, East Kilbride, Glasgow, G74 4PA 
 
*********************************************************************************
Disclaimer: This electronic mail, together with any attachments, is for 
the exclusive and confidential use of the recipient addressee. Any other 
distribution, use or reproduction without our prior consent is 
unauthorised and strictly prohibited. If you have received this message in 
error, please delete it immediately and contact the sender directly or the 
Robert Wiseman & Sons Ltd IT Helpdesk on +44 (0)1355 270634. Any views or 
opinions expressed in this message are those of the author and do not 
necessarily represent those of Robert Wiseman & Sons Ltd or of any of its 
associated companies. No reliance may be placed on this message without 
written confirmation from an authorised representative of the company.
 
Robert Wiseman & Sons Limited reserves the right to monitor all e-mail 
communications through its network.
 
This message has been checked for viruses but the recipient is strongly 
advised to re-scan the message before opening any attachments or attached 
executable files.
 
ROBERT WISEMAN & SONS LIMITED
Registered Number: 87376 Scotland
Registered Office: 159 Glasgow Road,
East Kilbride, Glasgow, G74 4PA
 
********************************************************************************

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This e-mail is subject to the Telkom SA electronic communication legal 
notice, available at :
http://www.telkom.co.za/TelkomEMailLegalNotice.PDF
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20071220/c15259e0/attachment.html 


More information about the cisco-voip mailing list